|
Static
Torque Transducer
The
accuracy and quality of the Norbar Static Torque Transducers has
made them the first choice of many calibration laboratories
throughout the world
•
Accuracy
of ± 0.5%
of reading, through out the calibrated range.
Accuracy of up to 5000 N.m (5000 Ibf.ft)
•
Robust, heat treated, alloy steel torsion shaft design
•
Designed to ignore non torsional forces
•
Operates in clockwise and anti-clockwise directions.
|
•
Calibration up to 5000 N m (Ibf.ft) with UKAS Certificate, above
5000 N.m (Ibf ft) with a traceable calibration certificate
•
Calibrated in clockwise direction as standard Anti-clockwise
calibration provided on request
|
|
•
'SMART' transducers have a built in memory
circuit which contains essential information about the transducer
This information can be read by Norbar's 'Pro Log' instrument
meaning that when the transducer is connected, it is immediately
recognised and ready for use. When ordering for a Pro Log, use
part code suffix LOG' (eg. 50659 LOG) if you require a torque
units calibration certificate
•
'SMART' transducers can also be used with many instruments not of
Norbar manufacture. However, these will operate as normal ratio
calibrated (mV/V) transducers the 'SMART' data will not be read.
For non Norbar instruments or for when a mV/V certificate is
required, use part code suffix ' IND'.
|
|
