Digital Testers & Displays

//TruCheck

//Professional Torque Tester

//Torque Screwdriver Tester

//Torque Tool Tester

//T-Box and TDMS

//Harsh Environment Range

//Smart Torque Block

//Flange Mounted Transducers

//Static Torque Transducer

Accessories

//BENCH STANDS

//Joint Simulation Rundown Assemblies

//COMPUTER SOFTWARE

Loader

//TWL1500

//ISO 1500 and 2700

TEXT FIXTURE

//The CF5000

username

password

Torque Tool Tester

TTT - SERIES 3

The TTT shares all of the extensive features of the TST except that it has no internal
transducer. Instead, the TTT offers not one but three external transducer interfaces allowing
any three transducers to be simultaneously connected. Selection between the transducers is
made by a rotary switch at the back of the instrument case.

Any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from
Norbar or other manufacturers can be connected to the TTT. The “SMART” feature means
that once a transducer has been connected, the instrument will automatically recognise
calibration details such as mV/V output, serial number and capacity.

Norbar is UKAS accredited for the calibration of electrical torque indicator
displays and the TTT is supplied with a calibration certificate.This ensures
that each element of the system is fully traceable and interchangeable.

Pictorial display panel for easy mode selection.
Limit detection with low, pass and fail indication. Up to 12 target values can be set.
Digital limit state output for control of external tools.
Operation from fast charge internal batter y pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
Pulse count feature in Impulse mode and Clutch Tool mode.
“SMART” intelligence for transducer recognition.
Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
Analogue output allows the instrument to be used as par t of a process control system for performance analysis.
User selectable frequency response for each mode of operation.
All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
Supplied in carry case.
All common measurement units for torque are included plus users can configures their own units to interface with non torque transducers.

TTT

Part No.	Description
43228	Torque Tool Tester