|
SIMPLICITY
+ SAFETY + ACCURACY = RELIABILITY
SIMPLICITY.
Using "clip in" self energising seals
a minimum number of parts are used to make the
stud tensioner "SIMPLE
TO OPERATE".
SAFETY.
"Overstroking" the piston or premature
removal of hydraulic connections will release
pressurised oil. Tentec Hydraulic Nuts are "Intrinsically
safe". Operator
errors are countered through simple and
effective pressure release in a controlled and
safe manner.
Calculated accurate
pre-load in
the assembly will prevent bolt failure during
tightening.
ACCURACY.
Torque is eliminated and prevents the following
problems :- "frictional errors, over
stressed bolts, twisting in the bolt". USING
ACCURATE CALCULATIONS,
the bolt is loaded with PURE
tension
Single
or Multi-Tensioning a machine joint using Tentec
Hydraulic Stud Tensioners is simple,
very safe and accurate.
The result is RELIABLE
APPLICATION PERFORMANCE.
"What more
can a Design or Maintenance Engineer ask
for?"
The
data shown below is for customer use and
guidance. If the details given do not suit your
requirements, a large selection of alternative
sizes and designs is available at no extra cost.
|
