|
SIMPLICITY
+ SAFETY + ACCURACY = RELIABILITY
SIMPLICITY.
Using "clip in" self energising seals
a minimum number of parts are used to make the
stud tensioner "SIMPLE TO OPERATE".
SAFETY.
"Overstroking" the piston on hydraulic
tensioning devices will release pressurised oil.
Tentec Stud Tensioners are "Intrinsically
safe". Operator errors are
countered through simple and effective pressure
release in a controlled and safe manner.
Calculated accurate pre-load
in the assembly will prevent bolt failure during
tightening.
ACCURACY.
Torque is eliminated and prevents the following
problems :- "frictional errors, over
stressed bolts, twisting in the bolt".
USING ACCURATE CALCULATIONS, the bolt is loaded
with PURE tension
Single
or Multi-Tensioning a machine joint using Tentec
Hydraulic Stud Tensioners is simple, very safe
and accurate. The result is RELIABLE APPLICATION
PERFORMANCE.
"What more
can a Design or Maintenance Engineer ask
for?"
The
data shown below is for customer use and
guidance. If the details given do not suit your
requirements, a large selection of alternative
sizes and designs is available at no extra cost.
|
