With the new Tower Master the residual torque value for each and every bolt rundown is logged and saved. This tool makes the job easier, faster and of course more accurate, since each rundown is monitored by a transducerized tool
The Wheelmaster®, non-impacting pneumatic torque wrench, specifically designed for the trucking and bus industries. Designed for easy access to recessed wheel nuts, with150 to 750 ft.lbs of adjustable torque.
For Accurate Measurement of bolt tension in short structural fasteners. Capacity up to 126,000 lbs. Of bolt tension
The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration laboratories throughout the world.
Imperial Calibrated Transducers
Capacity
Part No.
Sq.Drive (in)
A (mm)
B (mm)
C (mm)
Bench Stand
100 ozf.in
50609.IND*
1/4 m/f
79
36.5
86
50211
1000 ozf.in
50616.xxx
10 lbf.in
50610.IND*
25 lbf.in
50612.xxx
50 lbf.in
50614.xxx
100 lbf.in
50617.xxx
250 lbf.in
50619.xxx
3/8 m/f
89.5
50212
500 lbf.in
50621.xxx
1000 lbf.in
50623.xxx
1/2 m/f
92.8
50213
1 lbf.in
50611.xxx
2.5 lbf.ft
50613.xxx
5 lbf.ft
50615.xxx
25 lbf.ft
50620.xxx
50 lbf.ft
50622.xxx
100 lbf.ft
50624.xxx
250 lbf.ft
50625.xxx
-
50702.xxx
3/4 m/f
118
54
141
50220
500 lbf
50627.xxx
50773.xxx
1 m/f
146
50221
2500 lbf.ft
50704.xxx
1 1/2 m/f
117
95
160
50127
5000 lbf.ft
50630.xxx
10000 lbf.ft
50777.xxx
2 1/2 m/f
145.5
130
209
25000 lbf.ft
50635.xxx
2 1/2 m/m
68.5
110
200
50779.xxx
30000 lbf.ft
50780.xxx
50000 lbf.ft
50636.xxx
3 1/2 m/m
98
165
271
60000 lbf.ft
50782.xxx
3 1/2 m/f
205
291.5
100000 lbf.ft
50637.xxx
*Not suitable for TST and TTTSelect part no.suffix .LOG if the transducer is to be connected to TST or TTT (example:50616.LOG).Forconnection to a non Norbar instrument or when a mV/V certificate is required,select .IND.