Manual

//Torque wrenches

//Screwdrivers

//Multipliers

Electric

//Screwdrivers

//Steel Erector Tools

//Wrenches

//Multipliers

//Enerpac Cylinders

//Pumps

//Pneutorque Models and Introduction

//PTM-52 Series Stall Models

//PTM-52 Series Internal & External

//PTM-72 Series Stall Models

//PTM-72 Series Internal & External Control Models

//PTM-92 & PTM-119 Series

//72mm Series

//Small Diameter Series

//Small Diameter Two Speed

//Standard Series

//Pneutorque up to 3400, Single Speed

// Pneutorque 3400, Two Speed

//Pneutorque to 100,000 Single Speed

//Series Remote Control

//Pneutorque Standard Series

//Pneutorque 72 Series

//Wheelmaster

//Heat Exchanger Torque Unit

//HETU-80

//Raptor Series

//DataTorq

username

password

All Standard and Small Diameter Series Pneutorques are available fitted with the remote motor.

Stall control gives repeatability of ±5% on a given joint.
Torque transducers and angle encoders available for all models. These form the basis of sophisticated control systems giving repeatability of up to ±2%.
Automatic Two Speed gearbox reduces run-down times.
Each gearbox supplied with a standard reaction device or, on request, one specifically designed to suit the application.

pneutorque remote control

Standard Series, Remote Control

† Speed at maximum air pressure and in high gear where applicable.