Manual

//Torque wrenches

//Screwdrivers

//Multipliers

Electric

//Screwdrivers

//Steel Erector Tools

//Wrenches

//Multipliers

//Enerpac Cylinders

//Pumps

//Pneutorque Models and Introduction

//PTM-52 Series Stall Models

//PTM-52 Series Internal & External

//PTM-72 Series Stall Models

//PTM-72 Series Internal & External Control Models

//PTM-92 & PTM-119 Series

//72mm Series

//Small Diameter Series

//Small Diameter Two Speed

//Standard Series

//Pneutorque up to 3400, Single Speed

// Pneutorque 3400, Two Speed

//Pneutorque to 100,000 Single Speed

//Series Remote Control

//Pneutorque Standard Series

//Pneutorque 72 Series

//Wheelmaster

//Heat Exchanger Torque Unit

//HETU-80

//Raptor Series

//DataTorq

username

password

The latest extension to the PTM tool range brings the speed advantage to the twin motor handle to higher capacity Pneutorque models.

Coupled with new gearbox designs, these new models deliver an ideal balance between robustness, speed and weight.

Fast - 2700 N.m version has a free speed of 57 rpm for rapid bolt run-down time.
Light weight - PTM-92-2700 weighs just 8.5 kg. All models are fitted as standard with a light but robust aluminium reaction plate.
Other reaction styles are available for maximum versatility.
Quiet - less than 85 db(A) when under load.
Non impacting - low vibration levels make these tools comfortable and safe to use.
Square drive is quickly and easily replaceable.
Bi-directional. The direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
'Soft Start' trigger control aids socket location and allows gradual and safe reaction location.
For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.

2700, 3500, 4500 and 6000 N.m Tools - Stall