Manual

Electric

Hydraulic

Pneumatic

username
password

PTM-72 Series Stall Models

PNEUTORQUE PTM-72 SERIESPTM-72-Series-Stall
STALL MODELS

PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

  • Fast - 1000 N.m version has a free speed of 140 rpm for rapid bolt run-down.

  • Light weight - single direction 2000 N.m stall tool weighs just 6.2 kg.

  • Quiet - less than 85 dB (A) when under load.

  • Non impacting - low vibration levels make these tools comfortable and safe to use.

  • Square drive is quickly and easily replaceable.

  • 'Soft Start' trigger control aids socket location and allows gradual and safe reaction location.

  • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.

  • 1” square drive available for the 1000 N.m Version, Part No. 18492.


1000, 1350 and 2000 N.m Tools – Stall

Model

Direction of Operation

Square
Drive

Part N.

Range

Free
Speed†

Length
‘A’

Tool
Weight

Reaction
Weight

in

N.m

lbf.ft

RPM

mm

kg

kg

PTM-72-1000-F

Forward only

3⁄4

18102.F06

200-1000

147-738

140

316

5.8

0.7

PTM-72-1000-B

Bi-directional

3⁄4

18102.B06

200-1000

147 - 738

140

316

6.1

0.7

PTM-72-1350-F

Forward only

1

18103.F08

270-1350

200-1000

105

316

6.1

0.7

PTM-72-1350-B

Bi-directional

1

18103.B08

270-1350

200-1000

105

365

6.1

0.7

PTM-72-2000-F

Forward only

1

18104.F08

400-2000

295-1475

70

349

6.2

0.7

PTM-72-2000-B

Bi-directional

1

18104.B08

400-2000

295-1475

70

398

6.5

0.7

† Speed at maximum air pressure.