• Ergonomic, lightweight and robust design is comfortable to hand hold and has mounting points for a neck strap (supplied).

• Integral rechargeable nickel metal hydride battery gives 16 hours plus of use for each charge.

• Supplied with universal charger/power supply. Pro-Log can be operated from the charger/power supply when the batteries are being charged giving zero down time.

• Menu driven operation and set up with full control from the integral alphanumeric keypad.

• Modes of operation for track, peak, first peak and first peak with highest peak also displayed.

• Specific modes of operation for testing all types of torque wrenches and power tools.

Technical Data

Accuracy:                 2 mV  transducer between 10-100% of capacity; 

                                +0.14% of reading.

Range:                       0-120% of transducer capacity.

Resolution:                1's range transducer < 1.25 mV, 1 digit in 1,000

                                 1's range transducer > 1.25 mV, 1 digit

                                1.5's range transducer < 1.87 mV, 1 digit in 1,500

                                1.5's range transducer > 1.87 mV, 1 digit in 15,000

                                2.5's range transducer, 1 digit in 2,500

                                5's range transducer, 1 digit in 5,000

Pro-Log

• Stores up to 10,000 data readings in user definable blocks. Each reading is stored with units of measurement, go/no go status, date and time.

• The data store is split into 100 blocks. Each block has a header containing such information as block size, name, number, tool type, transducer details, operators details.

• on board statistical analysis of data in each block.

• RS232 serial data output of reading, data store including header information and statistical results.

• Dual display for torque and angle, torque followed by angle, or torque and speed.

• All common units of measurement for torque, load and pressure.

• Go/No Go limits for torque/load/pressure and angle. Limit status is displayed, stored against each reading and there are logic outputs for control of external equipment.

• Supplied complete with power supply neck strap and carry case.

Note: Transducer leads not included. See below for details.

Transducer Leads

Pro-Log's compact size has made it necessary to use a high quality "Lemo" connector for the transducer leads.

Also, the introduction of angle measurement and 'smart' ability on Norbar's Rotary transducers has necessitated the use of a 10 Way military connector. 

This means that a range of transducer leads are necessary to connect all combinations of Norbar Instrument and transducer. 

The Part Code suffix indicates the length of the cable, ie. .225 is 225cm (2.25m). Other cable lengths available on request. Please use suffix to indicate required length (preferably in whole meter increments).