|
ISO
1000
Torque Wrench Loader
These
loaders allow torque wrenches to be calibrated or tested in accordance
with ISO 6789:1992, BS EN 26789:1994 and American military standard GGG
W 686. Their function is to take full advantage of the accuracy of the
ETS torque measuring system by reducing operator induced variations in
the calibration process
•
The high ratio, 1200:1 gearbox allows high torques to be applied, whilst
ensuring that the operator does not exceed the rate of increase of
torque specified in the standards.
•
The design allows for easy interchange of transducers using the Norbar
ETS and Static Transducer system.
•
The ISO 1000 90 ° facility allows the performance of torque wrenches to
be checked in two planes. Many wrenches give different torque values
according to their orientation in use.
•
Floating reaction point minimizes side loads on wrench.
•
Optional Small Reaction Plate (Part Code 20588) allows torque wrenches
down to 125mm in length to be tested.
•
Motorized version with speed control is available. This can be purchased
as a kit to motorize an existing ISO or as a complete ISO 1000 Motorized
Torque Wrench Loader.
|
