|
Annular
Torque Transducer 1500 Series
These
Annular transducers are designed to fit directly to Norbar gearboxes in
the '1500 Series' (Pneutorque, Electrotorque and Handtorque) and will
accurately measure the torque output via a display instrument
Accuracy of ± 0.5%
of reading, through out the calibrated range.
Robust heat treated alloy steel torsion tube design
Designed to ignore non torsional forces.
Incorporates slip rings to ensure that the cable will not wrap
around the tool during operation (not included in transducers for
'Remote' tools or Handtorque) 'SMART' transducers have a built in memory
circuit which contains essential information about the transducer. This
information can be read by Norbar's 'Pro Log' instrument meaning that
when the transducer is connected, it is immediately recognized and ready
for use. When ordering for a Pro-Log, use part code suffix .LOG' (eg.
50659 LOG) if you require a torque units calibration certificate..
'SMART' transducers can also be used with many
instruments not of Norbar manufacture. However, these
will operate as normal ratio calibrated (mV/V) transducers the 'SMART'
data will not be read. For non-Norbar instruments or for when a mV/V
certificate is required, use part code suffix .IND'
.NOTE. When fitting a transducer to a HT15
torque multiplier, select the 'Remote' type
|
|
