Manual

//Torque wrenches

//Screwdrivers

//Multipliers

Electric

//Screwdrivers

//Steel Erector Tools

//Wrenches

//Multipliers

//Enerpac Cylinders

//Pumps

//Pneutorque Models and Introduction

//PTM-52 Series Stall Models

//PTM-52 Series Internal & External

//PTM-72 Series Stall Models

//PTM-72 Series Internal & External Control Models

//PTM-92 & PTM-119 Series

//72mm Series

//Small Diameter Series

//Small Diameter Two Speed

//Standard Series

//Pneutorque up to 3400, Single Speed

// Pneutorque 3400, Two Speed

//Pneutorque to 100,000 Single Speed

//Series Remote Control

//Pneutorque Standard Series

//Pneutorque 72 Series

//Wheelmaster

//Heat Exchanger Torque Unit

//HETU-80

//Raptor Series

//DataTorq

username

password

72mm gearbox diameter allows excellent access.
Powerful – up to 2000 N.m output.
Switchable forward and reverse operation.
Quiet – less than 81dB(A), and non impacting for low operator fatigue.
‘Soft Start’ trigger control aids socket location and allows gradual and safe reaction take up.
For safety, gearbox can turn independently from the handle. Torque reaction is never transmitted back to the operator.
All torques can be achieved at less than 6 bar (90 psi).
Automatic Two Speed models offer all of the advantages of the single speed versions but with the additional benefit of a run down speed five times greater than the final torque speed.

72mm Series, Single Speed

† Speed at maximum air pressure.

72mm Series, Automatic Two Speed

† Speed at maximum air pressure and in high gear